For the doming technique projects above you'll need:
This is a multi-layer project, that can be done with or without the back glow-in-the-dark layer.
Here's how mine looks in the dark WITH the back layer added in GITD aqua:
Follow this link for a tutorial on working will all kinds of bezels.
The pendants above were cast in our Medium Molds, then Domed Up over a piece of Resin Color Film, with a bit of glitter mixed into the resin. Let that set up an hour or two, then push bent wire forms into the resin making a ripple effect and glossy dimension.
For this necklace I also embedded wire in cast pieces. Images were printed on Clear Photo Film. I embedded the film in clear Brilliant Resin using our Medium Silicone Mold and Cabochons Mold. We then added GITD powder into the resin to Dome Up the backs of these pieces, and embedded the wire as they were setting up. CLICK HERE for more Glow In The Dark Project Ideas.
You'll need Brilliant Resin, Resin Color Film, a Doming Tray, and a Spring Drill, and some colored wire. Cut strips were domed, then shaped (as shown in our Brilliant 3D Butterflies video), drilled, and attached with colored wire. The top one is about 3-1/2" across, the bottom one is about 1-1/4" across, and can be made into a necklace or earring.
How-To Videos Mentioned Above:
So cute! I was playing with the Open Frame Hoops from Nunn Design, and came up with this guy. My original plan was to make the center piece with just the 3D eyes, but then I was playing with wire and decided this creature should be feline.
To get the ripple effect around the eyes, start by creating the smallest black pupil hoops. Stick 2 of the Mini Hoops and 2 of the Small Hoops onto a piece of packing tape, press down to make sure they are stuck well. Mix Black Resin Colorant into a little bit of Brilliant Resin and pour it inside the Mini Hoops. Allow to set for at least 12 hours before touching.
Once the black centers are set up, peel them off of the tape and set them aside. Mix a new batch of resin and blend in some White Resin Colorant, pour this into the 2 Small Hoops, filling about 1/2 way. Let the White Resin set up for about 2 hours so it's nice and thick, then place the smaller Black Resin Hoops into the White Resin and press down a bit. Allow your eyes to set up completely before touching.
Cut a circle of Dichro-ISH Texture Film to fit inside the largest hoop. Cut a circle of packing tape about 1/4" smaller than the inside of your largest hoop. Then cut another strip of packing tape about 6" long. Stick the circle-shaped tape onto the strip, adhesive sides together (in the photo I'm using a piece of white non-stick paper so you can see what I'm doing, yours will be clear).
This will create a ring of adhesive for the project to stick to, without having stickiness in the center of the piece. This will make it easier to peel off later, without damaging the Texture Film. Fold over both ends of tape strip so that you don't stick to it while you are working.
Center the Dichro-ISH Film circle on the tape, then center the largest hoop on the tape so it surrounds the Film, pressing down to ensure it's stuck well all around. Mix a new batch of resin and pour some into the large hoop until the resin domes just a bit, without overflowing the hoop.
Allow this resin to set up for about 2 hours until it's nice and thick, then place your eyes wherever you want them. Let your assembled resin piece set up to fully harden before peeling off of the tape - minimum of 1 day, 2-3 days preferred.
Create wire accents (I made ears), flip your piece over on the Silicone Doming tray and make sure your piece is level so the resin won't flow off the sides. Mix up a new batch of resin, let it thicken in the mixing cup for about 30 minutes, then dome up the back of your creation. Watch this Doming Up video to see this technique in action.
Allow it to further thicken for about 30 minutes, then embed your wire accents. I bent copper wire into ears, but you can make anything you'd like. Let resin cure fully and enjoy your Dichro Hoop Kitty Cat! Hang it by the ears from chain, make it into a pin or a magnet, or whatever you want. Color shift based on what's behind the film!