Adding Findings to your Resin Creations

by Fran Valera

There are many ways you can add findings to your resin creations, turning them into jewelry, accessories, buttons, or decorative items like the ones shown below. 

SCROLL DOWN FOR HOW-TO VIDEOS

Drill a hole:

You can drill holes into or through your resin pieces.  Then you can either glue in an eye-screw, or add a jumpring or a wire through the hole.  If your piece is clear, drill at an angle so the finding will hide the white drill line.

If your piece is colored, you can drill straight in and then glue in an eye-screw finding.

Embed findings in resin:

Once your piece is made, you can add another thin layer of resin to the back and embed a finding, to make a bail or link, or turn your pieces into all types of jewelry, buttons, and decorative pieces, like the handles below. 

Glue on flat-back bails:

A drop or two of resin is the very best way to create a permanent, waterproof bond, but if you don't have any handy you can also use E6000 or another strong adhesive.

Wire wrap your pieces:

 

Finish your resin creations using headpins and jumprings as findings:

 

 

 

In this how-to video, you can fast-forward to 11:38 for a focus on findings:

 

 

And here's a demo of clean and easy drilling with our Spring Drill: