DIY Resin Eyes

I am sooooo hooked on making resin eyes.  I've found 3 ways to do it, each has its uses.  All of them were made with our Brilliant Resin and Silicone Cabochons Mold, and all require layers of resin, so leave yourself at least 4-6 hours between each layer for set-up.

Here's a complete tutorial on making all 3 types: 

You can compare the 3 types above and decide which you want to make, or make some of each! 

Silly Eyes

These are easy to make, by mixing either opaque colorants or glitters into the resin for each layer.  You can use fine or chunky glitters, and even different shapes of glitter, depending on what effect you're going for.  Make your layers as thick or thin as you'd like.

Realistic or Creature Eyes

These were made by painting nail polish (or you can use acrylic paint), between cured layers of resin.  It's important to have a clear layer between colors to give them dimension.

Photo Eyes

You can also print images of eyes onto our Special Photo Paper for realistic eyes.  For these we poured a clear layer of resin about the same size as the iris cut-out, and let it set up.  Then we poured another thin layer of resin and pushed our eye print down onto the hardened layer below, to squish out any trapped bubbles.  It's best to fill the mold about half-way, so the eyeballs aren't too domed. 

This one was made using our Clear Photo Film, and surrounded with POLYMER CLAY and some fake eyelashes! 

Here is a thorough tutorial for using your Silicone Cabochons Mold, with lots more project ideas:

Ready to buy your own mold or resin? 

Visit our store!

 

Posted in casting, cosplay, costume, eyes, fake eyes, fursuit, how to, Little Windows, resin, silicone mold, tutorial


Next

Previous